Setting up your Jub Jub email on an iPhone (iOS 3.x) using IMAP

This page explains how to set up an iPhone or iPod touch running iOS 3.x to send and receive e-mail as an IMAP account. (You must have first created the mailbox on our servers.)  (Setting up Email on your iPhone 3.0 as a POP3 Account (the usual setup)).

If you have a current iPhone running iOS 4, view the main iPhone page instead.

The pictures below are from the iPhone 3 screens, but the iPad and iPod touch screens are very similar.

1. Go to the mail setup screen.

From the iPhone main screen, tap Settings > Mail, Contacts, Calendars > Choose OTHER > Add Mail Account. This makes the new account screen appear.

 

2. Choose the "Other" account type.

Tap Other at the bottom of the new account screen:

And then "ADD MAIL ACCOUNT":

This makes the "Enter your account information" screen appear.

 

3. Enter the basic account information.

Type the following settings:

  • Name: Your full name, such as "Bart Simpson"
  • Address: Your e-mail address
  • Password: Your e-mail password

The screen should look similar to this:

 

When you're finished, click Save in the upper-right corner of the screen.

4. Enter the remaining account information.

Leave IMAP selected at the top of the screen, then type the following settings under "Incoming Mail Server":

  • Host Name: mail.yourdomain.com
  • User Name: Your FULL e-mail address, ie: Bart@jubjub.com
  • Password: Your e-mail password

And the same settings under "Outgoing Mail Server":

  • Host Name: mail.yourdomain.com
  • User Name: Your FULL e-mail address, ie: Bart@jubjub.com
  • Password: Your e-mail password

The screen should look similar to this:

screen shot

Some things to bear in mind:

  • The "User Name" in both sections must be all lowercase.
  • The "Outgoing Mail Server" user name and password are required, not optional. You need to enter your user name and password if you want to send mail.
  • It's correct for the "Incoming Mail Server" and "Outgoing Mail Server" settings to be identical.
  • The passwords you enter here must be the e-mail mailbox password (which is not necessarily the same as your master account (DirectAdmin or FTP) password).

When you're finished, click Save in the upper-right corner of the screen.

The steps above are sufficient for basic e-mail. You can check your e-mail to make sure it's working at this point: Press the Home button to return to the main screen, then click the Mail icon.

5. Set up Drafts, Sent and Trash folders (optional but recommended).

You probably also want to make sure your iPhone stores sent, deleted and draft messages on the mail server. This will allow you to see those messages if you also use Webmail (or another IMAP mail program) to read the mailbox.

First, make sure you've read incoming mail on your iPhone at least once. Then return to the mailbox settings page by going back to the iPhone home screen and tapping Settings > Mail, Contacts, Calendars > address@example.com.

You'll see a screen that looks similar to the one you just typed your settings into, but if you scroll down to the very bottom, you'll find a new Advanced item. Tap Advanced:

screen shot

You'll see a section titled "Mailbox Behaviors". We want to change all three "behaviors", so first, tap Drafts Mailbox:

screen shot

That makes the "Mailboxes" screen appear:

screen shot

Tap Drafts from the "On the Server" section, as shown in blue above. This saves that setting and returns you to the "Mailbox Behaviors" screen.

Repeat the same steps for the "Sent Mailbox" (choosing Sent on the server) and the "Deleted Mailbox" (choosing Trash on the server). When you've finished, the "Mailbox Behaviors" should look like this:

screen shot

You're finished!

Your iPhone can now send and receive e-mail.

By the way, if you ever need to return to these screens and view or edit the settings of an existing account, you can tap Settings > Mail, Contacts, Calendars > address@example.com at any time.

Troubleshooting

After following these instructions, some people tell us they don't see some messages they expect, or that older messages disappear after they've seen them.

This will happen if you have another mail program checking the same mailbox, and the other program is set to delete messages immediately. Changing the settings on the other program to make it leave a copy of the messages on the servers will fix that.

  • 221 Users Found This Useful
Was this answer helpful?

Related Articles

SETTING UP your Jub Jub Email Acct on OUTLOOK 2007 - Linux Hosting

Microsoft Outlook 2007 This page explains how to set up Microsoft Outlook 2007 to send and...

SETTING UP your Jub Jub Email Acct on OUTLOOK 2002 and 2003 - Linux Hosting

Microsoft Outlook 2002 and 2003 This page explains how to set up Microsoft Outlook 2002 or...

SETTING UP your Jub Jub Email Acct on Outlook Express - Linux Hosting

Microsoft Outlook Express This page explains how to set up the free Microsoft Outlook Express...

Safe Password Management

One of the headaches of the modern age is setting up passwords for each account we have online....

POP3 vs. IMAP Email Setup

If you use an email app (such as Outlook or Apple Mail), you’ve probably seen these acronyms...