SETTING UP your Jub Jub Email Acct on OUTLOOK 2007 - Linux Hosting Print

  • 220

Microsoft Outlook 2007

This page explains how to set up Microsoft Outlook 2007 to send and receive e-mail for a POP MailBox you (or someone else) created (for you). (If you want to set up an IMAP account CLICK HERE.  If you need to know the difference between a POP Email account & an IMAP email account CLICK HERE.)

Tip: make sure that the program you are using is Microsoft Outlook, and not Microsoft Outlook Express. These two similarly named programs have different set up instructions. Be sure you do not see the word "Express" on the screen when you start the program. (If you're using Outlook Express, see "Setting up Outlook Express".)

1. Start the Microsoft Outlook program.

You can use the Start menu to start Outlook 2007. When it opens, click Tools, then Accounts Settings from the menu bar:

2. The "Accounts Settings" window appears.

Make sure the E-mail tab is selected, then click New.

If you are adding another Email Account to your Outlook profile, you will see your existing Email Account. Just click on NEW.

If adding an ADDITIONAL account, will see this screen

3. You are asked to choose the E-mail Service.

Choose Microsoft Exchange, POP3, IMAP or HTTP, then click Next.

IF There is an EXISTING ACCOUNT, and you're ADDING ANOTHER Email Account to your OUTLOOK PROFILE, then you will get a slightly different screen:

4. The "Auto Account Setup" screen appears.

When this window appears, simply leave the fields empty, check the Manually configure server settings or additional server types checkbox, then click Next.

Auto Account Set up Screen - Hit Manual

5. The "Choose E-mail Service" screen appears.

Choose Internet E-mail, then click Next.

6. The "Internet E-mail Settings" screen appears.

This is the window where you'll enter most of your account settings.

The settings are as follows:

  • "Your Name" is the name that other people will see when you send them e-mail. It should usually be your real name, such as John Smith or Joan of Arc.
  • Enter your "E-mail Address". The address must be the e-mail address of the POP mailbox you created or was created for you.
  • For "Account Type", choose POP3.
  • Enter mail.yourdomain.com for both the "Incoming mail server" and "Outgoing mail server (SMTP)".
  • Enter your FULL e-mail address again as the "User Name".
  • Type your email password into the "Password" box. This is the password you chose (or was assigned to you) for this e-mail address when you (or someone else)  created the mailbox through your site's Control Panel. Remember that this password is different from your Control Panel password. (**You can "check" Remember password if you don't want Outlook to ask you for the password each time you read e-mail.)
  • Make sure that "Require logon using Secure Password Authentication (SPA)" is not checked.
  • Do not click "Test Account Settings" yet; it will not work until you complete the next steps.

 


7. Click the "More Settings" button.

A new "Internet E-mail Settings" window appears.  The Internet Email Settings Window appears, and will default to the GENERAL SETTINGS tab:

8. Choose the "Outgoing Server" tab.

In the "Outgoing Server" tab, check My outgoing server (SMTP) requires authentication.

Select Use same settings as my incoming mail server.

9. Choose the "Advanced" tab.

Click the "Advanced" tab and look at the "Outgoing Server" setting.

The settings are as follows:

Advanced Settings Tab

 

The "INCOMING SERVER" usually defaults to Port 110, for POP3 setups.

The "OUTGOING SERVER" usually defaults to Port 25, for POP3 setups.

 

Your local internet service provider, ISP, (how you connect to the internet) may block outgoing traffic on your outgoing server (using your domain name).

If you have trouble sending email OUT using Port 25, you can change the "Outgoing Server (SMTP)" port number to 587.

Doing this ensures that your ISP will not block your outgoing mail connections.

This is especially useful if you are configuring a LAPTOP (or other mobile device, like an iPhone or Blackberry).  You will most probably be connecting to other wireless networks other than your own to connect to the internet and to send email.

You will be able to send email more easily using Port 587, when connecting to lots of different Wi-Fi Networks that may not be your own, ie: an internet cafe, or a different office.

So if you need to, update the OUTGOING SERVER (SMTP) to 587:


DIFFERENT SERVER SETTINGS:

IF YOUR WEBMAIL URL RESOLVES to "http://web03.jubjub.net", then the settings are slightly different.

To check if your website is on web03, CHECK YOUR WEBMAIL, by entering HTTPS://www.YOURDOMAINNAME.com/WEBMAIL in the ADDRESS BAR of your browser.

If Squirrel Mail appears, and resolves to the URL: "http://web03.jubjub.net/WEBMAIL" (as shown in the screenshot below) then your site is hosted on WEB03, and requires different settings.


Squirrel Mail Screenshot showing URL resolving to Web03 address

For those domains that use web03.jubjub.net settings, the GENERAL SETTINGS SHOULD BE:

SET INCOMING SERVER to: web03.jubjub.net
SET OUTGOING SERVER to: web03.jubjub.net

For those domains that use web03.jubjub.net settings, the ADVANCED TAB SETTINGS SHOULD BE:

SET INCOMING SERVER to 995: (click "this server requires an encrypted connection (SSL))
SET OUTGOING SERVER  to 587: and click on TLS - if TLS not available, then choose AUTO

 

Advanced Settings Tab


ADVANCED SETTINGS TAB: LEAVE A COPY OF MAIL ON THE SERVER:

It's also good to probably check "Leave a Copy of Mail on the Server", and set a time when Outlook will delete the email off the server.

This is useful if you are checking your email from various computers (desktop and a laptop) or mobile devices such as a Blackberry or iPhone.  Checking this will instruct Outlook to CHECK YOUR EMAIL account and DOWNLOAD your email from the SERVER, but LEAVE A COPY of it on the SERVER for the time you specify (5 days is usually good), so that your iPhone or Blackberry or other computer will also be able to download the same email, before it disappears off the server.

So be sure to check the "REMOVE FROM SERVER" after "5 Days" or "7 days" as well.


For a more in-depth "how to", Click here.

10. Click OK to close the "Internet E-mail Settings" window.

After you close the "Internet E-mail Settings" window, the "Add New E-mail Account" screen will still be visible.

11. Test the settings.

Click Test Account Settings. Outlook will usually tell you that "all tests completed successfully".

If Outlook tells you a test failed, double-check to be sure you've entered the settings correctly.

If Outlook still tells you that a test failed, we recommend continuing anyway. This is because some software on your computer (including Norton Antivirus) can make the "Test Account Settings" feature fail, even when Outlook is correctly configured. In most cases, Outlook will work properly when you try sending real messages.

If the "Test Account Settings" window is still open, close it to continue.

12. Finish the wizard.

Click Next, then Finish.

Outlook setup is complete

You're finished! Try sending yourself a test e-mail message to make sure it works.

 

Optional additional steps: Leaving copies of mail on the server

Finally, if you read e-mail in more than one program, you may want to leave a copy of each read message on the server (LINK TO ANOTHER ARTICLE)


Was dit antwoord nuttig?

« Terug